Huawei mate40mate40 Pro back rendering exposure or PRO + version available

Yesterday evening, the so-called Huawei mate 40 and mate 40 Pro shell rendering was exposed, in which the camera device layout is different from the previous rumors. Let’s first look at mate 40 pro. The front is a curved hole digging screen. The capsule shaped hole is located in the upper left corner. It seems that there are at least three sensors in it. The screen curvature is high, but the solid volume key and power key are completely retained. < / P > < p > in the evening of yesterday, images of Huawei mate40 and mate40 pro’s back were circulated on the Internet. At the same time, the rendering images of the two models were also exposed. From the exposure rendering, we can see that the front of mate 40 Pro adopts curved hole digging screen. The capsule shaped hole is located in the upper left corner. It is possible that it is equipped with at least three sensors. The screen curvature is high, and the entity volume key and power key are retained. < / P > < p > from the latest back rendering, we can see that the mate40 Pro uses a round camera module on the back, and the layout has changed a little. This time, the flash of the camera module is located in the center, with a round lens on the left and right sides and a round lens in the lower left corner, and a square lens above. < / P > < p > the other model mate 40 does not show the specific difference from the pro version in the rendering image, and the back is almost the same. Maybe it will be different in other aspects, but it is not obvious in the rendering. < / P > < p > however, according to the outline drawing of mate 40 and mate 40 Pro by onleaks, the two models have obvious differences in front curvature, and the black edge of the two models can be seen directly. In addition, mate 40 is a “Yuba” three shot, Pro is a four shot, it may also have a higher specification of PRO + version. Video Number assistant internal test online! Four functions let you send 1g video on the computer