The unique design of GRS’s first tripod makes it easier to adjust and form a stable shooting platform

Made of 6061 aluminum and stainless steel, the tripod can be mounted to the top of the fender or to the bottom of the barrel in the traditional way. < / P > < p > according to the official GRS manuscript, the product was originally designed for the Ragnarok rifle chassis, optimized for prone shooting, and belongs to a heavy top mounted bipod. < / P > < p > based on a rugged design, it is easy to operate and fully functional, with more stringent manufacturing tolerances than the tripod normally mounted on the fender support. < / P > < p > the bottom of the tripod can be turned over, with a smooth surface on one side and sharp claws on the other side, so as to adapt to different supporting surfaces and obtain the best stable support effect. < / P > < p > the height from the top of the tripod to the ground is 220-315mm, and the minimum gear is 10mm. Since the connection between the foot frame and the guard wood is through a socket, it can be installed on the top or under the fender, and can be inserted into the opening at the front end of the fender in the traditional way. < / P > < p > after release, the positioning pin will automatically reset under the spring to lock the foot rest. This special design allows the shooter to easily complete the adjustment without changing the aiming position. < / P > < p > the GRS tripod requires the use of a GRS specification bolt in order to be securely connected to the rifle. This is because the length of the pin and the position of the locking groove are different, so only special socket can be selected. < / P > < p > with the improvement of rifle shooting accuracy, the accuracy requirements of related accessories have also been greatly improved. As an important accessory of stable shooting platform, tripod has become one of the focuses of many enterprises’ development. 865 optimization is different? These mobile phones should teach you a lesson!